Lingenfelter 2010 Camaro SS Baseline Chassis Dyno Testing

[Tim@Lingenfelter]

We have finished with our baseline chassis dyno testing of our 2010 Camaro SS and the LS3 engine is putting out a respectable 373.91 horsepower and 369.75 lbs ft of torque at the rear wheels. We will be posting some more dyno runs soon after we finish the installation and tuning. :biggrin:

http://www.lingenfelter.com/images/2010%20Camaro004_900.jpg

http://www.lingenfelter.com/images/DSC07144_900.jpg

http://www.lingenfelter.com/images/DSC07148_900.jpg


Click here for a link to the --> chassis dyno video (http://www.lingenfelter.com/video)

[sultan-LPE-TT]

any numbers

[Tall Guy]

Dang! You guys aren't wasting any time on this one. :biggrin: I'm looking forward towards the results too. :cool:

[dallasstx]

Does the 2010 Camaro require a special hood to clear the Maggie ??

Guessing from the photographs... it may be a snug fit.

[Tim@Lingenfelter]

No aftermarket hood required as the Magnuson system tucks under the stock Camaro hood very nicely. The LS3 Camaro TVS2300 supercharger over all seems to be a very nicely packaged system and our install techs gave it the thumbs up. We were able to run some chassis dyno testing this afternoon with the TVS2300 installed and I will post a video and some additional pictures asap. :wink:

[Tim@Lingenfelter]

This is a chassis dyno test of the first Lingenfelter Magnuson TVS2300 powered LS3 2010 Camaro SS intercooled supercharger system. We are working on air intake upgrades now and should have some impressive power number soon. Lingenfelter has several 2010 Camaros coming in that are not spoken for, so customers looking for complete turn key cars can purchase from Lingenfelter because we should have several 2010 Camaro’s for sale very soon. :cool: Click here ---> for link to video (http://www.lingenfelter.com/video)

[dallasstx]

Gotta love the exhaust note with the Maggie when the pedal was put to the metal !

[Tim@Lingenfelter]

Here is the dyno sheet of the LPE 2010 Camaro with MP2300 supercharger as it was tested on Friday with the stock air filter, modified air box, Lingenfelter 100 mm mass air sensor, 100 mm secondary zip tube, stock exhaust manifolds, cats and cat back exhaust. Next up will be testing with Corsa's prototype full cat back exhaust system. :biggrin: http://www.lingenfelter.com/Forum/LPECamaro_V1_1400.jpg

[dallasstx]

Add 12 percent driveline loss and the magic number is 582 horses at the crank... and I'm betting those horses aren't Shetlands.

[sultan-LPE-TT]

sorry these are wheel horse power or Kranck ?

[Tim@Lingenfelter]

Here is the next dyno run of the LPE 2010 Camaro with MP2300 supercharger, with the stock air filter, modified air box, Lingenfelter 100 mm mass air sensor, 100 mm secondary zip tube, stock exhaust manifolds and Corsa's prototype full cat back exhaust system. Stay tuned more to come. :biggrin:


http://www.lingenfelter.com/images/LPECamaro_V2_1400.jpg

[Tim@Lingenfelter]

Here is the another run on the Camaro today with a set of American Racing G8 headers and a few other mods installed. Bowtie Smilie Thanks Magnuson for an excellent supercharger kit. :cool:

http://www.lingenfelter.com/Forum/LPECamaro_V3_1000.jpg

[dallasstx]

Awesome... simply awesome !

[Tim@Lingenfelter]

Here is a run we made this afternoon with the MP2300 after going back to the stock exhaust manifolds and cats with the Corsa prototype exhaust still installed. Video will be posted tonight of the dyno runs with the headers installed so you can get an idea of how it sounds. Bowtie Smilie


http://www.lingenfelter.com/Forum/LPECamaro_V4_1000.jpg

[91Z28350]

Awesome Numbers! Is this what would be representative of your "570" hp install, or the base install? Just getting my figures straight so I can order next spring.

[Tim@Lingenfelter]

Here is a video of the Camaro with the MP2300 supercharger, American Racing Headers, catalytic converters removed for testing purposes, Corsa prototype cat back exhaust. This is not a package for street use because of the catalytic converter deletion.

Bowtie Smilie


http://www.lingenfelter.com/video (http://www.lingenfelter.com/LPEforumfiles/../../video)

[91Z28350]

Tim,

Are you guys planning on selling any turn key car packages with the engine, chassis and body mods already done? As an example, Hennessey has the 570 Camaro @ $60K with body kit, engine/exhaust and wheel upgrades.