2009 C6 ZR1 LS9 Supercharger Isolator Install-Eliminates Rattle Or Noise At Idle

[Tim@Lingenfelter]

During the supercharger pulley upgrade for the 2009 C6 ZR1 we include the Lingenfelter solid isolator coupling to replace the factory spring loaded isolator coupling. The factory spring loaded coupling design can sometime cause a rattle at idle or partial throttle plus we have seen some signs of wear on the shaft from the stock spring loaded isolators. This solid isolator coupling is made from a very durable high temperature plastic and is a direct replacement to the original isolator. Here is a link to the store for purchase --> L960130709 (http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Store_Code=LPE&Product_Code=L960130709&Category_Code=)

This will work on stock superchargers or the upgraded version with the Lingenfelter pulley and air intake kit.


Here is the Lingenfelter version on the left and the stock on the right.


http://www.lingenfelter.com/Forum/LCTS-Vsuperchargerisolator.jpg


Picture of the stock one installed on disassembly.

http://www.lingenfelter.com/Forum/DSCN0748_900.jpg


New solid isolator going in to housing.


http://www.lingenfelter.com/Forum/DSCN0765_900.jpg