Frequently asked questions about the L460095297 Adj Launch Controller Timng Retard

[Ryan@Lingenfelter]

This thread is to designed to help answer questions about our LNC002 launch controller. If you have any questions feel free to post them here.

Thank You,
Ryan

[Ryan@Lingenfelter]

Is there a way that the box will dissable itself after launch so that it doesn't activate down track?



Our box will not disable itself after launch, at least not on its own. You either have to have another switch in the wiring to disable it once you are moving (that you manually switch) or you need to use our MPH switch to use that to disable it once you are moving.

Our MPH switch takes in the MPH signal from the ECM/PCM and you then adjust what MPH you want it to trigger at (much like an RPM switch).

If you always stage/launch off the brake, you can also wire it to the brake switch so it is only active when the brakes are on.

Some customers have let the launch controller trigger during the shift on manual cars (when you press in the clutch to shift) and have said it helps improve the shifts and allows them to do wide open throttle shifts.