Search:

Well here are the numbers, made 536hp and 505lbft at the rear wheel, noise levels are less than a jackhammer but more than library noise level...

I am getting a back pressure tool and will revert...

I replaced the Clutch with a LS7 clucth, which you will also need to get the LS7 slave. The driveshaft i couldnt touch, but the diff has a mod from Lindsay Cadillac, talk with Luke.

I also...

One good thing to minimize heat in the engine bay is to add heat reflective foil, Like i did. I scored DEI gold reflective material and to be honest it is doing the trick in keeping my engine bay...

If you use a low grade octane you will experience very low mileage, upgrade to 91/93 and you will also see a dramatic increase in range and power output...

Have a 2009 Mitsubishi with a 1.8 for...

Ok, we all know Stock exhausts just dont have that grinning factor to them. I use to have the SW 3" for my V, but the drone got to me so i benched that kit. I was fortunate enough to find one of the...

SWEET display...

Wish i could have been there to have seen them up front and personal

YOU ARE JOKIN!!!

They are that close in numbers? Given the fact that the new 09 weighs more then the old V adds to our benefit....

Can we get close to these numbers with a NA?

There is a V...

Its actually Kuwait in the middle east near Iraq...

I might have a problem with the intake tube...My rad is HUGE compared to stock. Will post pictures once i get my laptop back from the shop.

It is so tight, i cannot change the fan belt easily, i...

DAMN!!!!!

That are some impressive gains...

We have 10 of these Vs here in Q8, but manuals are special orders... :-(

Man that looks SWEET....It will fit under a BMR cross over tube in a 2005 CTS-v?

Have you ever wanted to know where the clunk noise came fromm when you released the clutch. WELL my friend i am about to share my wisedom with you...

If you were to ever look under the car you...

Due to the crampness of the engine compartment, your options are limited and well TIGHT!!!

Ron Davis is the only company that makes a high capacity rad...I would recommend also installin the LPE...

Alright, there are a few ways to solve this issue.

Stage 1 is Replace the rubber bushins in the rear with plastic ones.
LPE use to make them, Specter mmakes them, But stay away from the GM...

Well, i have to admit, there are plenty of clutch upgrades for the V.

But one of the best valued ones that adds some punch to that LS6/LS2 is the LS7 clutch with Slave. Any clutch upgrades will...