Announcement

Collapse
No announcement yet.

CAN2-02 relays

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • CAN2-02 relays

    I am trying to setup backup light relay and neutral safety switch relay for the T43 transmission controller. Since the T43 gear position is not in the library, I have created a custom can message based on the Microchip CAN Bus Analyzer output. No joy. What am I missing? The highlighted field is the current gear selection. 1=P, 2=R, 3=N, 4=D, 9=M, 8=1
    Click image for larger version

Name:	2017_04_28_14_33_18_Lingenfelter_GMLAN_CAN_to_Analog_Gauge_Relay_Output_Module_CAN2_002_Lingenfel.png
Views:	1
Size:	1.7 KB
ID:	10697

    Click image for larger version

Name:	2017_04_28_14_34_09_CAN2_Version_1.3.6_Classic.GDF_.png
Views:	1
Size:	6.5 KB
ID:	10698

    Click image for larger version

Name:	2017_04_28_14_34_40_CAN_BUS_Analyzer.png
Views:	1
Size:	4.2 KB
ID:	10699
Working...
X