Siemens 63 lb fuel injector LS1 LS6 LS2 Corvette, GTO Camaro, Firebird

	Quantity in Basket:none Code: RX-S107FM Price:$61.95 Shipping Weight: 1.00 pounds
	Quantity:
At the standard fuel pressure of the LS1 and LS6 engines, 58 psi (4 BAR), these injectors flow 63 lbs/hr. In addition, these units are high-impedance; making them compatible with most ECUs including the GM factory PCM and ECM used on the LT1, LS1 and most other GM V8 applications. Despite the high flow rate, these injectors provide a very linear flow rate even at low pulse widths allowing you to use a larger injector that normally possible without hurting idle and low speed driveability. These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. These injectors are the perfect upgrade for stock manifold & rail assemblies; replacing standard 75 mm packaged injectors. Also recommended for use in custom manifolds where optimum injector targeting requires more length. Engine performance and running quality is enhanced through the optimized spray pattern of these injectors. Unlike many “pencil stream” high flow injectors, these high flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors of less flow. Comes with high performance O-rings and inlet filter installed. Custom O-rings and spacers are also available from LPE when using these injectors with the LS2 intake manifold. You will also need to change the injector connectors when using these injectors on vehicles normally equipped with USCar connector injectors such as the 2005 and newer C6 Corvette and 2005 and newer GTO. Flow: 62.7 lbs per hour Impedance:12.5 Ohm Injectors sold each.

Related Item(s)

Code Name Image Price   KAT-A4096 LS2 Fuel Injector Adapter Kit With O Rings & Spacers   $34.95 V1003 LS2 & LS7 intake manifold adapter fuel injector O-rings   $10.79 CE-109077 Injector Connector Conversion Adapter LS2 to LS1   $63.59