RIPO-001 Relay Based DC Brushless Fan & Pump PWM Controller
Part Number: L460380001
Product availability: Not in stock
Shipping Weight: 1.00 pounds
Relay based fan speed control of DC brushless OEM and aftermarket fans.
Relay based pump speed control of DC brushless OEM and aftermarket electric water pumps (engine cooling, intercooler fluid cooling etc.).
Simple 2-Speed or 3-Speed control of DC brushless devices
The RIPO-001 is designed to provide the PWM speed control signal needed to operate OEM and aftermarket DC brushless cooling fans and fluid circulation pumps based on user selected speeds and relay inputs.
The RIPO-001 allows for the installation of DC brushless fans in vehicles that currently have OEM relay controlled 2-speed fan/s, three-speed fan/s, or multiple fan configuration. This allows DC brushless fans to be controlled using the existing ECM calibration parameters and ECM outputs.
The RIPO-001 can be used to control primary engine cooling fans, auxiliary engine cooling or other cooling fans
Two sets of easily adjustable device control switches
Low Speed Output % sets the low speed output in 1% increments (0%-99%)
High Speed Output % sets the high speed output in 1% increments (0%-99%)
Two activation input wires
High Speed Input is ground activated
Low Speed Input is user selectable for +12V or ground activation
Two control options
2-Speed Mode offers OFF, LOW speed, and HIGH speed.
3-Speed Mode offers OFF, LOW speed, HIGH speed, and MAX speed.
Both open drain and push-pull type signal outputs are provided
Works with OEM and aftermarket DC brushless electric fans & coolant pumps made/sold by:
GM, Spal Plus Series. Spal Non Plus Series, Bosch, Protechnic, Cooper Industries, Pierburg CWA 50, CWA 100, CWA 200, CWA 400, TechAFX and others to be added
Can be used to control multiple devices (all devices must be the same input type)
High setting output indicator to trigger a warning light or auxiliary systems
0-5 volt output of fan/pump target speed %
Send fan or pump speed to an ECM, data acquisition system or a gauge
Pigtail harness included for easy connectivity
Allows almost any vehicle to use the new high output DC brushless cooling fans and fluid circulation pumps. Can be incorporated into aftermarket cooling systems.
Control DC brushless fans using existing ECM calibration parameters and ECM outputs for speed control.
No ECM recalibration required
Speed percentage adjustable in 1% increments.
2-Speed or 3-Speed control
High temperature glass filled Nylon enclosure & fully epoxy potted circuit board for increased durability