215/220 .534/.544 HR114 - Old P/N 74220
Suggested for supercharged or turbocharged applications.
Lingenfelter designed several camshaft profiles to be used with the GM tuned port injection system & the LT1, LT4 fuel injection system. These camshafts were designed to maximize the power potential of your engine and work well within the RPM range of the intake manifold. Camshafts will require PCM programming will produce a good idle at 750 RPM. All of the Lingenfelter hydraulic roller cams are produced from a hardened steel core with a unique distributor gear. This eliminates the need for a special bronze distributor gear, which must be replaced frequently due to the soft material. Hydraulic roller cams may be used with the stock hydraulic roller lifters after careful inspection for wear.
2,600 - 2,800 stall torque converters are recommended.
These camshafts can be used in non roller style blocks with the addition of the Lingenfelter retro-fit cam button kit and aftermarket hydraulic roller lifters from Competition Cams.
350 - 383 CID SBC Engine with stock, High Flow Runners or LT1, LT4 Intake Manifold
View Product Instructions