Allow pumps and/or fans to run for a specified time
Time delay for drag racing, standing mile, and other racing events
Delay nitrous activation for a specified time
Activate timing retard after a specified time
Improve reaction time consistency by allowing racers to release the line-lock or trans-brake button at the top of the Christmas tree.
Cycle testing equipment based on a repetitive ON and OFF time
The TMR-001 is designed to control two relays based on a single stage timer. This module can be used to activate two relays to control fans, pumps, or other devices while the vehicle is keyed off. The TMR-001 can keep the devices on for a specified time. The TMR-001 can be used to delay nitrous activation and activate timing retard after a specified time. The TMR-001 also provides two different modes that allow the time to repeat or only allow the time to run once.
Two easily adjustable normally open or normally closed relay outputs
One +12V timer activation input.
The TMR-001 can be adjusted in 0.01 second, 0.1 second, or 1 minute increments.
The TMR-001 delay can be adjusted from 0.01 seconds to 999 minutes.
Repeat Mode and One Shot mode.
Three easily accessible buttons for programming and starting the timer.
One bright three-digit display used to display time and display settings while programming.
High current capacity - 10 A
Anything that draws above 10 A needs to use an external relay.
Can be used to control up two devices including fans, electric water pumps, and other devices.
Cool the vehicle after the vehicle is keyed off.
Can be used for cycle testing using the repeat mode.
Works over a wide temperature range
Voltage operating range: 9-18 volts
Max current: 10 A
Black anodized aluminum enclosure
Fully potted internally
Includes mating harness with fully sealed connectors